| Sensor Controller Series |
FH-5550/5050 Series |
| Sensor Controller Model |
FH-5550/5050 |
FH-5550/5050-10 |
FH-5550/5050-20 |
| Parallel IO |
NPN/PNP (common) |
| Memory, Storage |
FH-5550 series: 32GB RAM, 64GB ROM
FH-5050 series: 8GB RAM, 32GB ROM |
| Number of cores |
4 cores |
Main
Func-
tions |
Operation
Mode |
Standard |
Yes |
Double Speed
Multi-input |
Yes |
Non-stop
adjustment mode |
Yes |
Multi-line random-
trigger mode |
Yes (Maximum 8 lines) *1 |
| Parallel Processing |
Yes |
| Number of Connectable Camera |
2 |
4 |
8 |
Supported
Camera |
FH-S series
camera |
All of the FH-S series cameras are
connectable. |
All of the FH-S series
cameras are
connectable. *2 |
FZ-S series
camera |
All of the FZ-S series cameras are connectable. |
| Camera I/F |
OMRON I/F |
Possible Number of Captured
Images |
Refer to Catalog. |
Possible Number of Logging
Images to Sensor Controller |
Refer to the Vision System FH/FZ5 Series User’s Manual (Cat. No. Z365). |
| Possible Number of Scenes |
128 |
Operating
on UI |
USB Mouse |
Yes (wired USB and driver is unnecessary type) |
| Touch Panel |
Yes (RS-232C/USB connection: FH-MT12) |
| Setup |
Create the processing flow using Flow editing. |
| Language |
Japanese, English, Simplified Chinese, Traditional Chinese, Korean,
German, French, Spanish, Italian, Vietnamese, Polish |
External
Interface |
Serial Communication |
RS-232C × 1 |
Ethernet
Commu-
nication |
Protocol |
Non-procedure (TCP/UDP) |
| I/F |
1000BASE-T × 2 |
| EtherNet/IP Communication |
Yes (Target/Ethernet port) |
| PROFINET Communication |
• Yes (Slave/Ethernet port)
• Conformance class A |
| EtherCAT Communication |
Yes (slave) Refer to Catalog about EtherCAT Communications Specifications |
| Parallel I/O |
• 12 inputs/31 outputs:
• Use 1 Line.
• Operation mode: Except Multi-line random-trigger mode. |
• 17 inputs/37 outputs:
• Use 2 Lines.
• Operation mode: Multi-line random-trigger mode. |
• 14 inputs/29 outputs:
• Use 3 to 4 Lines.
• Operation mode: Multi-line random-trigger mode. |
• 19 inputs/34 outputs:
• Use 5 to 8 Lines.
• Operation mode: Multi-line random-trigger mode. |
| Encoder Interface |
Input voltage: 5 V ± 5%
Signal: RS-422A Line Driver Level
Phase A/B/Z: 1 MHz |
| Monitor Interface |
DVI-I output (Analog RGB & DVI-D single link) × 1 |
| USB I/F |
USB3.0 host × 2 (BUS Power: Port5 V/0.5 A)
USB2.0 host × 4 (BUS Power: Port5 V/0.5 A) |
| SD Card I/F |
SDHC × 1 |
Indicator
Lamps |
Main |
POWER: Green
ERROR: Red
RUN: Green
ACCESS: Yellow |
| Ethernet |
NET RUN1: Green
LINK/ACT1: Yellow
NET RUN2: Green
LINK/ACT2: Yellow |
| SD Card |
SD POWER: Green
SD BUSY: Yellow |
| EtherCAT |
ECAT RUN: Green
LINK/ACT IN: Green
LINK/ACT OUT: Green
ECAT ERR: Red |
| Power-supply voltage |
20.4 VDC to 26.4 VDC |
Current
con-
sumption |
When connecting an intelligent
compact digital camera
• When connecting the
following light or lighting
controller without an external
power supply
FLV-TCC1, FLV-TCC4, FLV-
TCC3HB
FLV-TCC1EP, FL-TCC1
• When connecting the
following light or lighting
controller
FL-TCC1PS, FL-MD[]MC |
5.6 A max. |
7.7 A max. |
12.2 A max. |
| Other than above |
4.5 A max. |
5.5 A max. |
7.3 A max. |
| Built-in FAN |
Yes |
Usage
Envi-
ronment |
Ambient temperature range |
Operating: 0°C to +45°C
Storage: -20 to +65°C (with no icing or condensation) |
| Ambient humidity range |
Operating:35 to 85%RH
Storage: 35 to 85%RH (with no condensation) |
| Ambient atmosphere |
No corrosive gases |
| Vibration tolerance |
Oscillation frequency: 10 to 150 Hz
Half amplitude: 0.1 mm
Acceleration: 15 m/s2
Sweep time: 8 minute/count
Sweep count: 10
Vibration direction: up and down/front and behind/left and right |
| Shock resistance |
Impact force: 150 m/s2
Test direction: up and down/front and behind/left and right |
Noise
immunity |
Fast Transient
Burst |
• DC power
Direct infusion: 2kV, Pulse rising: 5ns, Pulse width: 50ns, Burst
continuation time: 15ms/0.75ms, Period: 300ms, Application time: 1 min
• I/O line
Direct infusion: 1kV, Pulse rising: 5ns, Pulse width: 50ns, Burst
continuation time: 15ms/0.75ms, Period: 300ms, Application time: 1 min |
| Grounding |
Type D grounding (100 Ω or less grounding resistance) *3 |
External
Features |
Dimensions |
190 mm × 115 mm × 182.5 mm
Note Height: Including the feet at the base. |
| Weight |
Approx. 3.4 kg |
Approx. 3.6 kg |
Approx. 3.6 kg |
| Degree of protection |
IEC60529 IP20 |
| Case material |
Cover: zinc-plated steel plate
Side plate: aluminum (A6063) |
| Accessories |
Instruction Sheet (Japanese and English): 1, Installation Instruction
Manual for FH series:1,
General Compliance Information and Instructions for EU:1,
Member registration sheet: 1, Power source (FH-XCN): 1 (male),
Ferrite core for camera cable: 2 (FH-5[]50, FH-2050), 4 (FH-5[]50-10,
FH-2050-10), 8 (FH-5[]50-20, FH-2050-20) |
